Home                  
my account: Log In

2.4 Ghz double quad antenna

An easy to build, compact antenna for wireless lan applications that offers a reasonable amount gain.

Written by: G4RFR ( FRARS ) Saturday, 3 August 2002

Click for full size imageThe double quad is a simple to build but effective antenna for 2.45Ghz wireless lan or video sender use. The antenna can be matched to 50 ohms by adjusting the distance between the figure of 8 element and the backplane. In this case, the figure of 8 element is 17mm away from the backplane and this gives a good match. The backplane is 120mm by 80mm and is made from double sided PCB.

The antenna is fed with 50 ohm ut141 semi-rigid coax and a suitable low loss connector is attached to this. In the picture, the RF connector arrangement can clearly be seen. In this case, I have used two long bolts to support the connector to provide some mechanical stability.
The figure of 8 is connected to the semi-rigid such that 1 pair of conductors connect to the centre conductor, and the other two connect to the coax's outer.

In the picture, you can see that behind the active face of the antenna, the semi-rigid coax is supported with a bush again to provide mechanical stability. This bush was obtained from a minature BNC plug. The plug has to be modified by removing the bayonet locking collar and removing the contents of the cable attachment end. This end provides an excellent method of ensuring a good ground connection between coax and backplane. Of course, since the dimensions are now known, simply soldering the coax to the backplane will suffice.

This antenna makes an ideal dish feed as it's beamwidth is fairly wide. A link with this antenna and a dish has been tested over a 6Km path, with 11Mbps connection being obtained at all times.

Links:

  • 2.4Ghz quad double quad [Click here]

  • Attachments: (Click to view/download):
         
    pauls double quad VSWR.xls      

    Email author | Link to this page | Print | Log In

    FRARS Features

    FRARS Clothing

    Get your FRARS sweatshirt, polo shirt or cap embroidered with your callsign!


    Getting Licensed
    FRARS runs regular courses to help you prepare for your amateur radio licence.
    For more information Click here

    UK Microwave Group

    In early 2004 the UK Microwave Group (UKuG) became the representative voice of the UK amateur radio microwave en­thusiast after the RSGB disbanded its own Microwave
    Committee.

    Official website:

    Microwavers.org

    © Copyright 2001-2013 Flight Refuelling Amateur Radio Society.